The setting and hardening process of low cement castables is affected by many factors, mainly involving material composition, additives, construction conditions and environmental factors.
Material Composition
Low cement castables often use aluminate cement as a binder. When the CA content in cement is high, the hydration speed is fast and the setting and hardening are rapid; when the CA₂ content is high, the early hydration is slow, but the strength development in the later stage is significant. Too low a cement dosage will lead to insufficient binding force and slow setting and hardening; too high a dosage may lead to a decrease in volume stability due to concentrated hydration heat.
Additive
Accelerators accelerate cement hydration and shorten setting time. Retarder inhibits cement hydration and prolongs setting time. Water reducers reduce water consumption, improve construction fluidity, and indirectly affect the density of hydration products; expansion agents adjust the volume change during the hardening process, but if used inappropriately, it may interfere with the setting process.
Construction and Maintenance Conditions
Excessive water usage will cause the cement hydration products to disperse, affecting the impermeability and durability. Excessive water usage will lead to insufficient hydration and incomplete coagulation and hardening.
Uneven stirring will lead to inconsistent local setting speed; insufficient vibration will affect the density and strength after setting and hardening. Temperature <5℃ will prolong the setting and hardening time, and may even cause hydration stagnation; temperature >30℃ will accelerate hydration, but it may cause internal stress concentration and microcracks due to early hydration. Insufficient humidity will lead to loose surface and low strength after setting and hardening. Reasonable moisture retention can promote the continuous hydration reaction and improve the quality of the hardened body.
Environmental and Other Factors
The CO₂ in the air will react with cement hydration products to generate CaCO₃, forming a "carbonized layer" on the surface, which may delay internal coagulation and hardening; impurities in the construction environment (such as oil stains, acidic substances) will interfere with the cement hydration reaction and cause abnormal coagulation.
When cement is exposed to moisture, it will hydrate prematurely, reducing its activity and slowing down the setting and hardening of the castable. If aggregates and fine powders are not stored properly, the moisture content will increase, affecting the control of actual water consumption. Reasonable particle grading can reduce porosity, make the cement paste more evenly distributed, and promote the uniformity of setting and hardening. Low bulk density will increase water demand, indirectly affecting setting performance.
The setting and hardening of low cement castables is the result of the combined effects of material composition, construction technology and environmental factors. In practical applications, it is necessary to optimize the mix ratio, use additives reasonably, and strictly control the construction and maintenance conditions to ensure that the castables achieve the ideal setting and hardening effect.
