Performance Analysis Of Low Porosity Clay Bricks For Glass Kilns

Jun 20, 2025

Leave a message

    Low porosity clay bricks for glass kilns are a special refractory material designed for high-temperature molten glass production environments. Its performance advantages mainly come from its low porosity, dense structure and optimized chemical composition. Next, we will introduce its performance characteristics.

    High Refractoriness

    The refractoriness can reach 1630~1750℃, which is higher than ordinary clay bricks and can withstand the long-term high temperature of the melting part of the glass furnace. The low-porosity structure reduces the penetration path of the liquid phase at high temperature and delays the softening and deformation of the refractory bricks.

    High Temperature Volume Stability

    It can prevent the kiln structure from cracking due to brick shrinkage or expansion.

    Anti-corrosion Of Glass Liquid

    The porosity of low porosity clay bricks used in glass kilns reduces the penetration depth of molten glass by 40% to 60%, thus extending its service life.

    Air Corrosion Resistance

    The dense structure reduces the gas penetration channels and the corrosion resistance is 20%~30% higher than that of ordinary clay bricks.

    Thermal Shock Resistance

    It adopts composite particle grading and micro-crack design, and can resist thermal shock ≥15 times under 1100℃ water cooling cycle, and can withstand thermal stress shock during glass kiln start-up and shutdown or temperature control.

    Low Thermal Conductivity

    The thermal conductivity is ≤1.0W/(m・K) at room temperature and ≤2.0W/(m・K) at high temperature (1000℃), which can reduce the heat loss of the kiln and reduce energy consumption.

    High Strength Support

    The thermal conductivity is ≤1.0W/(m・K) at room temperature and ≤2.0W/(m・K) at high temperature (1000℃), which can reduce the heat loss of the kiln and reduce energy consumption.

    Wear Resistance

    The dense structure makes its surface harder, and the wear rate against glass liquid splashing or air flow erosion is 30% lower than that of ordinary bricks. It is suitable for areas with severe erosion such as glass kiln feeding ports and liquid flow holes.

    Low porosity clay bricks for glass kilns have achieved performance upgrades in terms of fire resistance, corrosion resistance, thermal shock stability, etc. through the design of low porosity + high density + optimized crystal phase. They are ideal materials for key parts of the high-temperature zone of glass kilns. Their performance advantages not only extend the life of the kiln, but also bring comprehensive benefits to glass production by saving energy and reducing maintenance costs.