Although fire resistant spray coatings and refractory castables are both amorphous refractory materials, they play completely different roles in the field of industrial high temperature protection.
What is fire resistant spray coating
It is mainly composed of refractory aggregate, binder and additives, and needs to have good fluidity and adhesion so that it can be evenly attached to the surface of the substrate through spraying equipment. It usually contains fiber materials to enhance the anti-stripping and toughness.
Construction technology of fire resistant spray coating
It is sprayed onto the surface of the substrate by a wet or dry sprayer, without the need for formwork, and is suitable for construction of complex shapes or curved surfaces. Accelerators are often added to shorten the hardening time, making it suitable for emergency repairs or rapid construction. It needs to be sprayed in layers, and the thickness of each layer is usually no more than 50mm to avoid falling off.
What is refractory castable
It is mainly composed of refractory aggregate, fine powder and binder, and needs to have high fluidity and self-leveling properties, and be suitable for pouring into molds for molding.
Construction technology of refractory castables
It needs to be poured after supporting the formwork, and compacted by a vibrating rod to ensure that there are no air holes. It needs to be left to cure for 24-48 hours, and then gradually heated up by baking to avoid cracking. It is suitable for flat lining of large areas (such as furnace bottoms and flues).
In summary, the core difference between the two lies in the construction method and structural performance. Spray coatings are fast and flexible, while castables win with high strength and durability. The actual choice needs to be considered comprehensively in combination with construction conditions, heat load type and cost budget.
