There are significant differences between low cement castables and traditional castables in terms of composition, performance characteristics, and construction technology.
Element
1.Low cement castable
The cement dosage is usually around 5%, and some even reduce it to 1%-2%. In addition to cement and refractory aggregates, ultrafine powders such as silica fume and alumina powder, as well as admixtures such as water reducers are also added.
2.Traditional castables
The cement dosage is generally 15%-25%, and it is made of refractory aggregate and high-alumina cement.
Performance characteristics
1.Low cement castable
High density and low porosity; the strength gradually increases with increasing temperature, the mid-term strength and late-term strength are far superior to traditional castables, and it also has high solidification strength at room temperature; it has good volume stability, and after drying and calcining, the volume shrinkage is small; it has excellent thermal shock resistance, slag resistance, and erosion resistance.
2.Traditional castables
The porosity is relatively high and the density is low; the strength decreases significantly at 800℃-1200℃; the corrosion resistance is relatively weak.
Construction technology
1.Low cement castable
Low water requirement, strict maintenance - humidity and temperature need to be controlled to avoid cracking caused by too fast drying. High construction difficulty - precise control of water addition and mixing time is required.
2.Traditional castables
High water demand, simple maintenance - natural maintenance at room temperature is sufficient. Convenient construction - low operating requirements, suitable for rapid construction.
It can be seen that low cement castables are significantly better than traditional castables in high temperature performance, corrosion resistance and service life through optimized formula, but the construction and maintenance requirements are higher and suitable for harsh working conditions. Traditional castables are suitable for scenes with low requirements due to their low cost and easy construction. When choosing, it is necessary to weigh the working conditions, cost budget and construction conditions.
