1.Q: What are high alumina insulating bricks? A: It is a thermal insulation refractory product made primarily from bauxite, with an Al2O3 content of at least 48%. It achieves this through a special process, such as adding a foaming agent and combustible materials to create pores and a porous structure. This allows it to combine high refractoriness with low thermal conductivity, and is primarily used for insulation in high-temperature environments.
2. Q: What is the difference between it and ordinary high alumina bricks?
A: The core difference between the two lies in their structure and functionality. Ordinary high-alumina bricks have a dense structure, low porosity, and high strength, and are primarily used in the working layer of kilns that withstand high temperatures, impact, or erosion. High alumina insulating bricks, on the other hand, have a porous structure with a porosity of 66%-73%. They have lower strength but excellent thermal insulation properties, and are primarily used in insulation layers to reduce heat loss.
3.Q: What is the maximum operating temperature?
A: The maximum operating temperature depends on the Al2O3 content and bulk density. Conventional products with an Al2O3 content of 48%-60% have a maximum operating temperature of 1250-1350°C. High-aluminum products with an Al2O3 content of over 60% have an operating temperature of 1500-1550°C.
4.Q: Is it suitable for use in scenarios where it comes into direct contact with molten metal or highly corrosive media?
A: Not suitable. The porous structure of high alumina insulation bricks makes them less resistant to erosion and corrosion. If they come into direct contact with molten metal or strong acid or alkaline media, the pores will become corrosion channels, causing damage to the brick body. They are usually paired with dense refractory bricks as the working layer, with the bricks themselves acting as the outer insulation layer.
5.Q: How to judge the quality?
A: It can be judged by the following indicators: The Al2O3 content directly affects the refractoriness. The higher the content, the better the high temperature resistance. A composition test report is required; The porosity is in the range of 66%-73% and the bulk density is in the range of 0.4-1.35g/cm³. Too high or too low may affect the thermal insulation or strength. thermal conductivity is preferably ≤0.4W/(m・K) at room temperature, and the smaller the increase at high temperature, the better; There are no obvious cracks or chipped corners on the appearance, and the dimensional deviation meets industry standards.
6.Q: What are the advantages compared to clay insulation bricks?
A: Its core advantage is its greater high-temperature resistance. Clay-based insulation bricks have a maximum operating temperature of approximately 1200°C and an Al2O3 content of only 30%-40%. High alumina insulation bricks, with an Al2O3 content of ≥48%, can withstand temperatures of 1250-1550°C, making them more suitable for higher-temperature industrial furnaces such as those used in metallurgy and ceramics.
7.Q: What issues should be paid attention to during construction?
A: Avoid violent collisions; use high-temperature adhesives to ensure tight joints and reduce heat loss through gaps; avoid bearing weight.
8.Q: What is the typical service life?
A: The service life depends on the operating environment. In dry, non-corrosive, and temperature-stable environments, it can last 5-10 years.
In environments with frequent temperature fluctuations and mild corrosion, it can typically last 3-5 years. If exposed to strong impact or corrosion, the service life will be shortened, and protective measures will be required to extend the service life.
