Which Parts Of The Rotary Kiln Are Composite Precast Bricks For Rotary Kiln Used In?

May 24, 2025

Leave a message

    Composite prefabricated bricks for rotary kilns are designed according to the working conditions of different parts of the kiln and are mainly used in the following key areas:

news-800-800

    1. Firing zone (high temperature zone)

    Located in the middle of the kiln body, the temperature is the highest (1400~1600℃), and it is subjected to long-term erosion by clinker melting and corrosion by alkaline gases. Corundum-silicon carbide composite bricks are used in this area. High-purity corundum (Al₂O₃≥90%) provides a refractory foundation, silicon carbide (SiC) enhances thermal shock resistance, and chromium oxide (Cr₂O₃) coating is added to the surface to resist the penetration of alkaline substances, ensuring stable attachment of the kiln skin and extending the service life to 12~18 months.

    2. Transition zone (thermal stress concentration zone)

    Between the firing zone and the decomposition zone, the temperature fluctuates greatly (1200~1400℃), and it is susceptible to erosion by CO₂ and SO₃ gases and thermal stress shock. High-alumina-spinel composite bricks are used, with high-alumina bauxite (Al₂O₃ 70%~80%) as the matrix, and magnesium-alumina spinel (MgAl₂O₄) is introduced to reduce the thermal expansion coefficient. Zirconia (ZrO₂) is added to the surface to improve the anti-stripping property, effectively alleviating the cracks caused by sudden temperature changes.

    3. Decomposition zone (wear zone)

    The temperature is about 800~1200℃, and the material decomposes here with severe mechanical wear. Silicon carbide-mullite composite bricks are used. The mullite matrix (3Al₂O₃·2SiO₂) provides medium-temperature strength, silicon carbide particles (20%~30%) enhance surface wear resistance, and the rough texture design helps form a protective kiln lining, reducing direct erosion of materials. At the same time, high thermal conductivity accelerates heat transfer to the material.

    4. Cooling zone (kiln tail)

    The temperature drops suddenly to below 800℃, facing the scouring of clinker particles and rapid cooling stress. Gradient composite bricks are used, with a high-hardness chrome corundum layer (Cr₂O₃-Al₂O₃) on the surface to resist wear, silicon carbide in the middle layer to buffer thermal stress, and lightweight materials in the inner layer to insulate, taking into account both impact resistance and energy saving, reducing heat dissipation losses by 15%~20%.

    Special process section

    The hazardous waste incineration area uses zirconium-chromium composite bricks (ZrO₂-Cr₂O₃) to resist molten salts and acidic gases; the discharge port of the metallurgical kiln uses silicon nitride combined with silicon carbide bricks to withstand metal melt penetration.

    Composite prefabricated bricks for rotary kilns use material and structural innovations to accurately protect core problems such as high temperature, corrosion, and wear in various parts, significantly improve the life of the kiln lining and operating efficiency, reduce kiln shutdown maintenance, and become a key material for optimizing the operation of modern rotary kilns.