The bonding strength of low cement refractory castable is closely related to the construction process.
During the mixing process, the amount of water added is the key. If too much water is added, the low cement refractory castable will be too thin and soft, resulting in a too thick cement slurry layer between the particles. During the drying and heat treatment process, the water evaporates and leaves a large number of pores, thereby reducing the bonding strength; if too little water is added, the castable is difficult to mix evenly, and the particles cannot be fully wrapped by the cement slurry, which will also affect the bonding strength. If the mixing time is too short or too long, it will also interfere with cement hydration and have an adverse effect on the bonding strength.
During molding, improper vibration method, insufficient strength or excessive vibration will cause excessive internal pores or stratification, and quality problems of the mold, such as uneven surface, will also cause uneven force on the castable and poor density.
During the curing stage, if the curing temperature is too low, the cement hydration rate will be slow or even stop, resulting in slow growth of bonding strength; if the curing temperature is too high, the water will evaporate too quickly and the cement slurry will dry prematurely, affecting the full hydration reaction and may also cause greater thermal stress inside the castable, thereby reducing the bonding strength.
During baking, if the temperature rises too fast or is too high, the castable will crack, peel off, and damage the internal structure. If the baking is uneven, different parts of the castable will be heated inconsistently, resulting in different degrees of expansion or contraction, thus forming stress inside, causing cracks and reducing the bonding strength.
It can be seen from this that each link of the construction needs to be precisely controlled to ensure the bonding strength of the low cement refractory castable.
