The service life of high alumina refractory bricks is affected by a variety of environmental factors, which directly or indirectly damage the brick structure through chemical erosion, physical action or mechanical wear. The following is a detailed analysis from four dimensions: temperature conditions, chemical erosion media, mechanical wear environment and special working conditions:
1. Influence Of Temperature Conditions
Long-term high temperature load will cause the low-melting materials in the brick to soften, resulting in gradual compression and deformation of the brick and structural collapse.
Temperature fluctuation (thermal shock) damage mechanism: when the brick is cooled or heated suddenly, internal stress is generated due to uneven thermal expansion coefficient, which causes cracks or peeling when it exceeds the tensile strength of the brick.
2.Influence of chemical corrosion media
Acidic medium erosion, such as the volatile SiO2 gas in the glass kiln reacts with Al2O3 in the high-alumina refractory bricks to form a low-melting silicon-alumina glass phase, causing the brick surface to melt and peel off; acidic gases such as SO2 and SO3 in the chemical kiln react with CaO impurities in the bricks to form calcium sulfate, causing the bricks to crack.
Alkaline medium erosion, such as K2O and Na2O in cement kiln raw materials, volatilize and react withAl2O3in bricks to form potassium aluminate or sodium aluminate. These low-melting products penetrate the brick body to form a honeycomb structure; NH3 in blast furnace gas in metallurgical furnaces reacts with SiO2 in bricks to form ammonium silicate, and the volume expansion causes the brick body to become brittle.
Slag erosion - FeO, CaO and other components in the slag react with Al2O3 in the brick to form grossamite or ferroaluminum spinel. If the brick body has insufficient corrosion resistance, the erosion depth can reach 5~10mm/year.
3.Influence of Mechanical Wear Environment
Material scouring and wear - high-speed materials at the kiln inlet and elbow flue continuously scour the brick surface, causing wear on the surface edges and corners and increased roughness.
Masonry stress wear - improper expansion joint setting causes brick expansion and compression under high temperature to produce lateral stress, resulting in brick breakage or dislocation.
Vacuum or high pressure environment - gas in the pores of the bricks in the vacuum furnace escapes, causing the brick structure to become loose. At the same time, the vacuum accelerates the volatilization of low-melting materials, and the erosion rate is 1.5 to 2 times higher than that at normal pressure. In a high-pressure reactor, the gas pressure causes the corrosive medium to penetrate into the interior of the brick faster, exacerbating chemical corrosion.
Strong redox atmosphere - In a high oxygen environment, low-valent impurities in high-alumina refractory bricks are oxidized to high-valent states, and the volume expands by about 10%, causing microcracks. Reducing gases such as CO in a reducing atmosphere gas kiln react with Fe2O3 in the bricks to form FeO, which reduces the load softening temperature of the bricks. At the same time, FeO and SiO2 form low-melting products.
The impact of environmental factors on the life of high alumina refractory bricks is cumulative and time-sensitive. In practical applications, it is necessary to accurately evaluate the adaptability of the bricks through working condition simulation tests, and dynamically adjust the maintenance strategy in combination with regular monitoring to maximize its service life.
