Key Points For The Construction Of Silicon Carbide Corundum Plastic

May 29, 2025

Leave a message

    Silicon carbide corundum refractory plastic is a plastic refractory material made of silicon carbide and corundum as the main aggregates, with binders, additives and other components, which are evenly mixed. Its construction quality directly affects its service life and performance, and it is necessary to strictly control the details of each link. The following are several key points to pay attention to during the construction process:

news-800-800

    Preparation Before Construction

    Before construction, the surface of the equipment should be cleaned to remove impurities such as oil, dust, rust, etc., to ensure that the surface is dry and flat. At the same time, according to the shape and size of the construction site, prepare the corresponding anchor nails and fix them as required. The mesh spacing of the anchor nail tips is about 120-150mm.

    Stir to Mix

    Mix the various raw materials of silicon carbide corundum refractory plastic according to the specified mix ratio. The mixing time should be long enough to ensure that the materials are evenly mixed and achieve good plasticity. Generally, a forced mixer is used for mixing. The coagulant is evenly added during the mixing. After dry mixing for 1 minute, 4-5% of the adhesive is added and stirred for 3 minutes. When the material has a certain plasticity, it can be discharged for use.

    Construction Method

    The construction is carried out by applying, tamping and compacting. The plastic is laid on the required part, evenly applied and compacted to make it closely combined with the equipment surface. During construction, attention should be paid to controlling the thickness of the blank, which can be determined according to the design requirements of different furnace types.

    Construction Environment

    The construction environment temperature should be appropriate, generally between 5℃-35℃, and avoid construction in high temperature, low temperature or humid environment. If the construction is interrupted, the ramming surface should be covered with plastic cloth to prevent rapid drying.

    If you have more questions about silicon carbide corundum refractory plastic in practical applications, or want to learn other related knowledge, please feel free to communicate with us.