Application Of AZS33 Fused Zirconium Corundum Brick in Glass Industry

Jul 09, 2025

Leave a message

    AZS33 Fused zirconium corundum brick is one of the core refractory materials in the glass industry. Its excellent properties such as high temperature resistance, resistance to glass liquid corrosion, and low pollution make it the preferred material for key parts of glass kilns.

    Glass Furnace Melting Pool System

    The melting pool is the core area where glass raw materials are melted into glass liquid. The environment is hot and the erosion of glass liquid and volatiles is strong. AZS33 Fused zirconium corundum brick is mainly used on the upper part of the side wall, which can effectively reduce the peeling of the wall and extend the service life. It can be used in the furnace arch to ensure the stability of the furnace arch structure and avoid cracking due to temperature fluctuations. It can be used in the area near the feeding port to reduce the wear and peeling of the feeding port and maintain the sealing performance of the kiln.

    Working Tank and Clarification Tank

    The working tank is used for homogenization and temperature regulation of glass liquid, while the clarification tank is responsible for removing bubbles in the glass liquid. Both are in direct contact with the glass liquid, and have extremely high requirements for the corrosion resistance and low pollution of refractory materials. Using AZS33 fused zirconium corundum brick as pool wall bricks can significantly reduce the erosion rate of glass liquid on bricks and reduce the generation of stones. Using it as paving bricks can reduce the penetration of glass liquid and avoid damage to the internal structure of the bricks.

    Material Channel and Chute

    The material channel is the channel that transports the glass liquid from the working pool to the molding equipment, and the launder is used to guide the glass liquid into the mold. Both must ensure that the glass liquid temperature is stable and not contaminated. AZS33 Fused zirconium corundum brick is used on the side wall and bottom of the material channel to reduce the refractory stone in the glass liquid and ensure the transparency and purity of the glass products. It can be used in the launder lining to reduce the flow resistance of the glass liquid and avoid defects caused by local retention.

    The core of the application of AZS33 fused zirconium corundum brick in the glass industry is to ensure the longevity of key parts of the kiln and reduce the pollution to the glass liquid. Its performance is adapted to the harsh environment of "high temperature, strong corrosion, and high purity requirements" in glass production. It is an important material to improve the operating efficiency of glass kilns, reduce production costs, and ensure glass quality.