The public welfare nature of refractory raw materials mainly depends on the mineral and particle composition of the raw materials, which is closely related to the manufacturing process of refractory materials. These properties mainly include particle size and particle size distribution, fineness and specific surface area, plasticity and bonding, drying shrinkage and firing shrinkage, sintering temperature and sintering range, etc.
1.Particle size and particle size distribution
Particle size refers to the particle size of refractory raw materials. Particle Size Distribution (PSD) refers to the weight percentage of particles in different particle size levels (expressed in mm, μ m, or mesh size) within a continuous range. The particle size distribution of clay raw materials has a significant impact on their plasticity, drying performance, and firing performance. The particle size distribution of raw materials also has a significant impact on the bulk density, porosity, mechanical strength, and thermal shock stability of refractory products. To obtain stable quality refractory materials, in addition to requirements for the chemical mineral composition of the raw materials, there should also be clear requirements for their particle size distribution.
The determination of particle size distribution is usually carried out using sieve analysis and particle analyzer. Screening analysis includes dry screening and water screening. Due to the limitation of sieve aperture, sieve analysis is suitable for determining the particle distribution of coarser particles (>10 μ m). Particle analyzers are commonly used for determining the size distribution of clay and differential grade fine particles.
2.Fineness and specific surface area
Fineness refers to the degree of fineness of powdered raw materials, often expressed as the residual percentage or specific surface area of a standard sieve, or as the percentage composition of particle size or the average diameter per unit weight of material. There is no strict difference between fineness and particle size, but the former is accustomed to representing the degree of fineness of fine powder raw materials.
Specific surface area refers to the surface area per unit mass of raw materials, measured in meters per gram. Integrating the surface area and inner surface area. The ideal non porous material only has an outer surface area; But raw materials with pores have an inner surface area in addition to their outer surface area. There are many methods for determining specific surface area, including gas adsorption, organic molecule adsorption, and gas permeability.
3.Plasticity and Bonding
The property of a substance that undergoes deformation without cracking after being subjected to external forces, and retains its deformed form without returning to its original state after the external forces are released, is called plasticity. Plasticity is an important molding process indicator for clay. Plasticity is related to the ability of solid particles to adsorb water, specific surface area, and water volume. For example, when clay is mixed with water, a layer of water film is adsorbed on the surface of a large number of clay particles, which makes it easy for the particles to slide under external forces and has a certain bonding force, thus having high plasticity.
The measurement of plasticity includes plasticity index method and plasticity index method, as well as plasticity moisture measurement. The plasticity index refers to the range of changes in moisture content of clay when it is in a plastic state, and its value is equal to the difference between the liquid limit (liquid limit) and the plastic limit (plastic limit). The liquid limit is the upper limit of the moisture content of clay when it is in a plastic state. When the moisture content exceeds the liquid limit, the clay is in a semi-solid state. The difference between liquid limit and plastic limit, expressed as a percentage, is the plasticity index.
The production process of refractory bricks
Aug 07, 2024
Leave a message
