The common materials of high strength lightweight refractory bricks produced by Haixin Company are mainly divided into the following categories:
High-alumina: With alumina as the main component (Al₂O₃ content is usually >48%), it has high cost performance and is the most widely used. Balanced strength, refractoriness, and thermal shock stability. Application: load-bearing insulation layer of industrial kilns such as hot blast furnaces and heating furnaces.
Mullite: The main crystal phase is mullite (3Al₂O₃·2SiO₂). It has excellent high temperature strength, creep resistance, thermal shock stability and low high temperature thermal conductivity. It is a representative of high-performance lightweight bricks. Application: petrochemical cracking furnace, high-end ceramic kiln.
Corundum: The main crystal phase is α-Al₂O₃. It has extremely high refractoriness (>1800°C), high temperature strength and chemical stability, but the cost is high. It is used in extremely high temperature or harsh chemical environments. Application: high temperature experimental furnace, key parts of waste incinerators.
Zirconium-containing: Introducing zirconium oxide (ZrO₂) into alumina or mullite matrix significantly improves thermal shock resistance, corrosion resistance (especially alkaline slag resistance) and high temperature strength. Application: glass kiln, alkaline environment industrial furnace.
Siliceous: Less common, composition: SiO₂>90%.
Features: Good acid resistance, but limited high temperature volume stability. Application: Specific temperature zone of coke oven.

