Knowledge About Lightweight Alumina Hollow Ball Bricks

Mar 13, 2025

Leave a message

    Today we will learn about the relevant knowledge of lightweight alumina hollow ball bricks. This article mainly gives a brief introduction from its performance characteristics, applications and other aspects.

    1 Q: What are lightweight alumina hollow ball bricks?

       A: With Al2O3 as the main raw material, alumina is made into hollow balls through high-temperature melting or electric melting, and then a binder is added to form and sinter to form a lightweight refractory material.

    2. Q: What are the main performance characteristics?

        A: The maximum use temperature of lightweight alumina hollow ball bricks is 1800℃, with high mechanical strength, several times that of general lightweight products, and good thermal stability. The re-burning line changes little, the thermal conductivity is low, the thermal shock resistance is good, the high temperature structure strength is large, it has high mechanical strength, and the volume density is only half of that of corundum products. It is an ideal ultra-high temperature material and energy-saving insulation material.

news-508-508

    3. Q: In what industries is it mainly used?

        A: It is widely used in petrochemical industry, gasification furnace, carbon black industrial reactor, metallurgical industry induction furnace, gasification furnace insulation lining, hard and super-hard alloy vacuum medium frequency ultra-high temperature furnace and ceramics, refractory materials and other high temperature and ultra-high temperature kilns.

    4.Q: What are the precautions during construction?

       A: Avoid direct contact with flames or molten materials during construction, and use with a dense refractory layer; use special tools when cutting to prevent damage to the hollow ball structure; fill the brick joints with matching refractory mud to reduce the thermal bridge effect. Check the surface cracks or erosion regularly, and local damage can be repaired; avoid rapid cooling and heating, and the recommended heating rate is ≤5℃/min.

    5 Q: How to choose the right product?

       A: Choose according to the temperature requirements (70%~99% Al2O3). The higher the content, the better the temperature resistance. Choose high-aluminum materials in acidic environments, and add anti-alkali components in alkaline environments. High-strength refractory materials must be used in high-temperature areas.

    After more than 30 years of development, Haixin Refractory has accumulated rich technical experience. Relying on a number of scientific research institutions, it has always been at the forefront of refractory research and development. We will provide you with the most comprehensive solutions for any problems you encounter during material selection and construction. Looking forward to our cooperation!