The working properties of plastics

Aug 10, 2024

Leave a message

Generally, it is required that plastic should have high plasticity and still have a certain degree of plasticity after long-term storage.
The plasticity of refractory materials is related to the characteristics of clay, the amount of clay used, and the amount of water, which mainly depends on the amount of water and increases with the increase of water. However, excessive water volume can have adverse effects, and it is generally recommended to use 5% to 10%.
In order to control the amount of clay in the plastic as much as possible and reduce the amount of water used, plasticizers can be added, which mainly have the following plasticizing effects: improving the moisture absorption of clay particles; Disperse clay particles and wrap them in a water film; Disperse humic substances in clay and gelatinize clay particles; Increase the electrostatic repulsion between clay particles in the clay water system; Stable sol; Exclude ions that hinder gelation as insoluble salts from the system, etc. There are many materials that can be used as plasticizers, such as pulp waste liquid, cyclic acid, lignosulfonate, lignosulfonate, lignosulfonate, lignosulfonate chromate, and other inorganic and organic colloid protectants.
To ensure that the plasticity of plastic does not significantly decrease during its shelf life, hydraulic binders cannot be used.