(1) Clay combined with silicon carbide brick
Clay bonded silicon carbide brick is a refractory product made from silicon carbide as the main raw material and clay as the binder. Its characteristics are high thermal conductivity, low coefficient of thermal expansion, good thermal shock resistance and wear resistance, and it is the earliest developed type of silicon carbide brick.
Black silicon carbide is used as the raw material for clay bonded silicon carbide bricks, with a chemical composition of SiC 98.0%, free C 0.5%, Fe 0.2%, and free SiO2 0.6%. Soft clay with good bonding properties and pulp waste liquid are used as binders. In the past, a relatively large proportion of clay was used, usually 10% to 15%, but now 3% clay and 5% pulp waste liquid are commonly used. The thermal conductivity of silicon carbide bricks with less clay addition is 3-4 times higher than that of silicon carbide bricks with more clay combination, and the load softening temperature and slag resistance are also higher. The manufacturing process of combining 3% clay with silicon carbide bricks is to prepare coarse, medium, and fine SiC according to the particle size distribution that can achieve the maximum packing density. Mix thoroughly before adding clay. After 3 minutes of dry mixing, add 4% pulp waste liquid (density 1.26-1.289/cm3) for mixing. The moisture content of the clay is about 1.5%. After 12 hours of trapping, the clay passes through a 4mm sieve and is molded using a brick press. The bulk density of the brick blank is 2.5-2.79/cm3. Dry for 2-4 days under natural drying conditions and burn in a tunnel kiln at a temperature of 1400 ℃.
This product is used as ceramic kiln furniture (shed board, bracket, box bowl, etc.), muffle cover for muffle furnace, lining brick for aluminum refining furnace, distillation tank for zinc distillation furnace, cement rotary kiln cooler, etc.
(2) Silicon nitride combined with silicon carbide brick
Silicon nitride combined with silicon carbide brick is a refractory product made by nitriding and firing SiC and Si powder as raw materials. Its characteristic is to use Si3N4 as the bonding phase. Si3N4 exists as needle shaped or fibrous crystals between SiC grains and is an important new type of refractory material.
Using the principle of reactive sintering, SiC bodies containing silicon powder are sintered through nitriding reaction, and the sintering process is completed in a closed furnace with nitrogen gas introduced and easy control. The temperature, pressure, and atmosphere inside the furnace must be strictly controlled. Main process parameters: nitriding gas pressure of 0.02-0.04MPa, oxygen content in the furnace atmosphere less than 0.01%, final nitriding temperature of 1350-1450 ℃, and total nitriding time varying with the shape and size of the product.
Silicon nitride combined with silicon carbide bricks has good alkali resistance, resistance to molten cryolite wetting, oxidation resistance, wear resistance, high thermal conductivity, thermal shock resistance, and extremely low electrical conductivity.
Silicon nitride combined with silicon carbide bricks is mainly used as the inner lining of the lower part of blast furnaces, which has a lifespan more than twice that of traditional refractory materials. In addition, it can be used as the inner lining of aluminum reduction electrolytic cells and ceramic kiln furniture, with the advantages of energy saving, improving lifespan, and not polluting the environment. It can also be used as the jacket brick for blast furnace air cooling pipes.
(3) Recrystallized silicon carbide products
Recrystallized (recrystallized) silicon carbide products are refractory products made from silicon carbide as raw material and directly bonded with silicon carbide. Its characteristic is the absence of a second phase and composed of 100% α - SiC. The chemical composition of the raw materials used to manufacture recrystallized silicon carbide is as follows: SiC 99.5%, free C 0.2%, Fe 0.08%, free SiO2 0.08%.
Recrystallized silicon carbide products are mainly used as kiln furniture, with advantages such as energy saving, increasing the effective volume of the kiln, shortening the firing cycle, improving the production efficiency of the kiln, and high economic benefits. They can also be used as burner nozzle heads, ceramic radiation heating tubes, component protection tubes (especially for atmosphere furnaces), etc.
Classification of silicon carbide bricks
Aug 16, 2024
Leave a message
