Heat Resistant SS304 Tortoise Shell Net

Heat Resistant SS304 Tortoise Shell Net

304 heat-resistant steel tortoise shell mesh is a high-temperature metal material with excellent heat resistance, oxidation resistance and corrosion resistance. It is widely used in petrochemical, electric power, metallurgy, aerospace and other fields. It can effectively disperse and transfer heat, ensure stable operation of equipment and reduce maintenance costs. When using it, you need to pay attention to the selection of appropriate materials and structures, and regularly check and maintain it.
It has high strength and toughness, and can withstand greater mechanical and thermal stress. Secondly, the heat-resistant steel tortoise shell mesh also has good corrosion resistance, and can operate stably for a long time in harsh environments. In addition, the heat-resistant steel tortoise shell mesh also has high thermal efficiency and a long service life, which can effectively reduce the maintenance cost and operating cost of the equipment.
Send Inquiry
Description
product-800-800

This product is the large mud claw tortoise shell mesh newly developed by our factory. High temperature resistant amorphous lining materials are generally reinforced with tortoise shell mesh, carbon steel (A3F) tortoise shell mesh, and 0Cr13 material is used in special cases. When using, first spot weld the tortoise shell mesh on the inner wall of the boiler or hot air duct, and then apply refractory material.

Advantages of tortoise shell mesh: The hexagonal large mud claw tortoise shell mesh significantly enhances the anchoring ability with the lining material. This effectively enhances the connection performance of the lining material itself, completely controls the phenomenon of easy peeling and shedding of the heat-resistant insulation layer, and improves the bonding strength of the lining material.

 

 

Turtle shell mesh material: used for casting amorphous lining materials, and has a wide range of materials to choose from for the anchoring effect of lining materials: A general carbon steel 0Cr13, 1Cr13, 0Cr18Ni9, 1Cr18Ni9Ti, 310S, hole spacing 2cm-8cm, mesh thickness 0.8cm-6.0cm, plate thickness 1mm-3mm, mesh size, customized by the purchaser in various specifications, and has cooperated with many main engine factories to produce various metal accessories, and has supplied various lining metal structural parts to many petrochemical equipment manufacturers. The products produced are widely used in large-scale petrochemical units, especially as one of the main accessories of the lining structure of the main equipment of the catalyst unit, it can improve the wear resistance and strength of the lining, and the wear-resistant lining is reinforced with tortoise shell mesh. Carbon steel (A3F) tortoise shell mesh is used in general parts, such as reactors and the first and second stage cyclone separators, U-tube regenerator flues, etc. Alloy (1Cr13) tortoise shell mesh is used in high temperature parts, such as regenerators and the first and second stage cyclone separators, etc. The tortoise shell mesh is a hexagonal grid punched out of 20*17.5 mm flat steel strip and fixed on the insulation nail end plate.

product-1271-800

 

Plate Thickness mm

Mesh specifications mm

Net thickness mm

Weight kg/m²

1.0

50×50

10

3.3

1.2

45×45

10

4.5

1.0

50×50

15

5.2

1.5

50×50

15

7.0

1.5

60×60

15

6.2

1.75

50×50

20

11.5

2.0

50×50

20

13.0

2.0

50×50

25

17.0

 

The use of tortoise shell net

 

Turtle shell mesh combined with wear-resistant ceramic coating is mainly used in cement industry's vertical mill powder selector and vertical mill outlet to dust collector pipeline, four-row dust collector, discharge funnel, discharge chute, grate cooler and point dust collector steel pipe, C1 cyclone outlet pipe and bend, kiln head and kiln tail coal powder conveying wear-resistant straight pipe and elbow, high-temperature fan casing and inlet and outlet ducts, circulating fan casing and inlet and outlet ducts. This product can also be used for the key wear-resistant and anti-corrosion treatment layer of various high and low temperature equipment in defense, petroleum, chemical industry, etc. It is a new generation of ideal materials to replace existing wear-resistant ceramic sheets and wear-resistant steel, solving the problems of wind selection abrasion, impact abrasion, and frequent shutdown and maintenance of parts in various industries.

 

Cement Industry

 

Serial number

Specific application areas

Remark

1

Duct from vertical mill outlet to cyclone or dust collector

 

2

Vertical mill upper, middle and lower shells and bottom plates

 

3

Vertical mill upper cone, lower cone bucket and feed chute

 

4

Vertical mill powder separator housing

 

5

Vertical mill sealed air duct

 

6

Air inlet duct and cyclone shell of raw material combined powder selector

 

7

All cyclone separator housings and inlet and outlet ducts

Including cyclone

8

Duct from grate cooler to electrostatic precipitator

 

9

Electrostatic precipitator housing

 

10

Tertiary air duct and high temperature valve

 

11

C1 cyclone outlet duct and elbow

 

12

Wear-resistant straight pipes and elbows for conveying pulverized coal at the kiln head and kiln tail

 

13

High temperature fan casing and air inlet and outlet ducts

 

14

High temperature fan casing and air inlet and outlet ducts

 

15

Coal mill head discharge pipe and raw coal bin cone bucket

 

16

Coal mill concentrator housing and air inlet and outlet ducts

 

17

Coal mill high temperature fan casing and air inlet and outlet pipes

 

18

Cement mill powder separator housing, inlet and outlet air ducts

 

19

Cement mill dust collector air inlet duct and air inlet box

 

20

Material transfer hopper and pipe

 

 

Steel industry

 

Serial number

Specific application areas

Remark

1

Ore and raw coal conveying silos and hoppers

 

2

Platform, hopper, receiving hopper

 

3

Platform, hopper, receiving hopper

 

4

Coke silo

 

5

Iron ore pipeline

 

6

Sintering system vibrating screen trough and mineral processing hopper

 

7

Long distance ore dressing silos and hoppers

 

8

Sintering silo

 

9

Dust collector housing and duct

 

10

Coal-fired boiler flue

 

11

Coal-fired boiler coal pipeline

 

12

Coarse and fine powder separator housing and air inlet and outlet ducts

 

13

Powder discharge machine housing and air inlet and outlet ducts

 

14

Sintering feed chute

 

15

Sintering bed dust collection system

 

16

Blast furnace feeding chute

 

17

Blast furnace stone water quenching flow and stone silo

 

18

Other areas with severe wear and tear and strong erosion

 

 

Thermal power industry

 

Serial number

Specific application areas

1

Bucket wheel excavator barrel

2

Belt conveyor hopper

3

Raw coal hopper (silo)

4

Coal mill outlet pipe

5

Medium speed grinding cylinder and separation baffle

6

Coarse and fine powder cyclone separator shell, cone bucket and inlet and outlet pipes

7

Primary and secondary air duct

8

High temperature fan casing

9

Powder exhaust machine casing and air duct

10

Coal burner cone

11

Circulating fluidized bed boiler combustion chamber, high temperature cyclone separator

12

Boiler flue

13

Pulverized coal pipeline

14

Dust collector pipes and elbows

15

Coal cinder and coal ash transportation pipeline

16

Dry ash air separator inner shell

Hot Tags: heat resistant ss304 tortoise shell net, China heat resistant ss304 tortoise shell net manufacturers, suppliers, factory, tortoise shell mesh for kiln, personalized tortoise shell mesh, decorative industrial tortoise shell mesh, wholesale tortoise shell mesh, laminated print decor tortoise shell mesh, tailored tortoise shell mesh