Silicon Carbide Ramming Mass

Silicon Carbide Ramming Mass

Silicon carbide ramming mass is also called baking-free ramming mass. It mainly uses graphite and silicon carbide with fixed carbon content of more than 90%-95% as the main raw materials, brown corundum, graphite powder, alumina powder, metal silicon powder, ultra-low calcium aluminate cement, sodium hexametaphosphate, fused corundum (or sintered corundum, bauxite clinker), binder, and is made through strict particle grading. The fibrous SiC generated in situ by Si powder and carbon materials in the ramming mass is interspersed in the gaps of the corundum skeleton structure, filling the pores and blocking the main channel for slag penetration, which is conducive to improving the resistance to slag erosion.
Silicon carbide ramming mass has the characteristics of good chemical stability, acid and alkali erosion resistance, high temperature resistance, good wear resistance, good erosion resistance and high thermal conductivity
Silicon carbide ramming mass is mainly used as the lining of coreless induction furnace for melting and heat preservation of iron, steel and non-ferrous metals. It is a mixture prepared with quartz as the main raw material and a small amount of sintering agent.
Send Inquiry
Description
product-800-800

Silicon carbide ramming mass is made of silicon carbide SiC as raw material, with binder (or without binder) added to form and sintered. The binder can be high-grade high-alumina bauxite and reducing agent. Silicon carbide ramming mass is a refractory product with high mechanical strength, good wear resistance, good resistance to rapid cooling and heating, high load softening point, good thermal conductivity, which is 5 to 10 times greater than that of general refractory materials.

Silicon carbide ramming mass is a kind of silicon carbide erosion-resistant and wear-resistant ramming mass produced exclusively by our company. Its main features are: high strength, good resistance to corrosion by solid particles and liquid slag, because the ramming material is added with a high hardness and good corrosion resistance, it can reduce the corrosion of alkaline substances on the furnace lining; good slag hanging, can make the thinner liquid slag hang a layer of slag on the furnace lining, forming a slag film, which plays a role in protecting the furnace lining, the material has a small thermal expansion coefficient and good thermal shock resistance; the material has a high SiC content, good thermal conductivity, and is conducive to heat conduction. It can be used in CFB boilers, etc.

 

 

The characteristics of silicon carbide ramming material are: high strength, good resistance to corrosion by solid particles and liquid slag, because the silicon carbide ramming material is added with a high hardness and good corrosion resistance.

product-1694-800

 

Silicon carbide ramming mass

 

ITEM

UNIT

INDEX

bulk density (110℃±5℃×24h) ≥

Kg/m³

2450-2650

cold crushing strength ≥

110℃×24h

MPa

15

 

800℃×3h

 

50

thermal conductivity(1000℃)

W/m.K

8-14

≥

thermal shock resistance(900℃ water cooling)

次

times

20

refractoriness ≥

℃

1790 (with slag protection)

test temp for less than 1% of linear change after heating(Keep warm for 3 hours)

℃

1400

SiC content >

%

89

applications and features

 

Used in high temperature zone like cyclone furnace,liquid slag hearth and fluidized bed furnace,and the combustion zone of coal furnace.

Hot Tags: silicon carbide ramming mass, China silicon carbide ramming mass manufacturers, suppliers, factory, Refractory Ramming Mass, Silicon Carbide Ramming Mass, Self-flowing Castable, Steel Fiber Castable, High Strength and Wear-resistant Castable, Hot Blast Furnace Refractory Spray Coating