This product is the large mud claw tortoise shell mesh newly developed by our factory. High temperature resistant amorphous lining materials are generally reinforced with tortoise shell mesh, carbon steel (A3F) tortoise shell mesh, and 0Cr13 material is used in special cases. When using, first spot weld the tortoise shell mesh on the inner wall of the boiler or hot air duct, and then apply refractory material.
Product advantages: The hexagonal large mud claw tortoise shell mesh significantly enhances the anchoring ability with the lining material, thereby effectively enhancing the connection performance of the lining material itself, completely controlling the phenomenon of easy peeling and shedding of the heat-resistant insulation layer, and improving the bonding strength of the lining material.
Turtle shell mesh material: used for casting amorphous lining materials, and has a wide range of materials to choose from for the anchoring effect of lining materials: A general carbon steel 0Cr13, 1Cr13, 0Cr18Ni9, 1Cr18Ni9Ti, 310S, hole spacing 2cm-8cm, mesh thickness 0.8cm-6.0cm, plate thickness 1mm-3mm, mesh size, customized by the purchaser in various specifications, and has cooperated with many main engine factories to produce various metal accessories, and has supplied various lining metal structural parts to many petrochemical equipment manufacturers. The products produced are widely used in large-scale petrochemical units, especially as one of the main accessories of the lining structure of the main equipment of the catalyst unit, it can improve the wear resistance and strength of the lining, and the wear-resistant lining is reinforced with tortoise shell mesh. Carbon steel (A3F) tortoise shell mesh is used in general parts, such as reactors and the first and second stage cyclone separators, U-tube regenerator flues, etc. Alloy (1Cr13) tortoise shell mesh is used in high temperature parts, such as regenerators and the first and second stage cyclone separators, etc. The tortoise shell mesh is a hexagonal grid punched from a 20*17.5 mm flat steel strip and fixed on the insulation nail end plate.
|
Plate Thickness mm |
Mesh specifications mm |
Net thickness mm |
Weight kg/m² |
|
1.0 |
50×50 |
10 |
3.3 |
|
1.2 |
45×45 |
10 |
4.5 |
|
1.0 |
50×50 |
15 |
5.2 |
|
1.5 |
50×50 |
15 |
7.0 |
|
1.5 |
60×60 |
15 |
6.2 |
|
1.75 |
50×50 |
20 |
11.5 |
|
2.0 |
50×50 |
20 |
13.0 |
|
2.0 |
50×50 |
25 |
17.0 |
Hot Tags: 310 anti-wear grille tortoise shell mesh, China 310 anti-wear grille tortoise shell mesh manufacturers, suppliers, factory, octagonal tortoise shell mesh, sized print decor tortoise shell mesh, tortoise shell pattern mesh, glued print decor tortoise shell mesh, oval tortoise shell mesh, 310 Anti wear Grille Tortoise Shell Mesh