Tundish Covering Castable

Tundish Covering Castable

The on-site application of tundish cover castable adopts a metal frame + refractory composite structure, which is now a relatively mature technology for cover application. This mode is to cast the refractory material in a mold made of a metal frame as a whole, and after curing, low fire, high fire and other heating processes, the moisture content of the whole castable is controlled within the ideal range and put into use. Refractory materials can withstand extremely cold and hot working environments, and have good slag resistance, which greatly increases the life of the cover. At the same time, the metal frame can firmly fasten the refractory material, enhance the flexural strength, and resist molten steel splashing.
The tundish cover castable can withstand extremely cold and hot working environments, and has good slag resistance, which greatly increases the life of the cover.
Send Inquiry
Description
product-800-800

Lightweight and heavyweight castables for tundish cover can be configured according to customer requirements. They have the characteristics of good thermal insulation performance, high strength, no peeling, not easy to deform and long service life. They can be cast on site or prefabricated according to customer requirements.

The container for molten steel, the tundish, includes the tundish lining material, the cover, the inner gate, the outer gate, the tuyere, the upper water inlet, the immersion water inlet and the sliding water inlet and the lower water inlet as part of the casting equipment from the tundish to the crystallizer, and other refractory materials. The castable used as the lining material of the tundish is mainly aluminum silicate material. The reasons for the damage of this material are as follows:

(1) Cracks and peeling of the castable;

(2) Sintering with the coating material;

(3) Damage to the slag line;

(4) Collapse of the tundish wall, etc.

 

 

Regarding the collapse of the ladle wall, the shape of the tundish and the use of anchors and ingates can prevent it from happening. The protection of the tundish castable is generally achieved by using a coating material, but its life depends on factors such as the sintering of the castable and the coating material, the structural peeling caused by the reaction between the castable and the slag, and the cracking and peeling caused by thermal shock. Therefore, when developing the material of the tundish castable, it is important to suppress the cracking and peeling of the castable during use due to the unique properties of the material.

product-1694-800

 

Main physical and chemical indicators of the tundish cover castable

 

Brand

HX-ZBG60

HX-LW1.5-H

Al2O3 (%);≥

60

55

Bulk density (g/cm³);≥

2.5

1.5

Compressive strength (MPa);≥

110℃×16h

35

10

 

1400℃×3h

60

15

Flexural strength (MPa);≥

110℃×16h

6

-

 

1400℃×3h

7

-

Post-burn line changes (%)

1400℃×3h

±1.0

±1.0

Hot Tags: tundish covering castable, China tundish covering castable manufacturers, suppliers, factory, Tundish Magnesium Calcium Coating, tundish castable, Tundish Permanent Layer Castable