YXJ-Ⅱ Acid-resistant and Heat-resistant Elastic Sealant For Power Plants

YXJ-Ⅱ Acid-resistant and Heat-resistant Elastic Sealant For Power Plants

1) Can be applied on steel plates and concrete lining materials;
2) High acid resistance and aging resistance;
3) High temperature resistance
It can withstand high temperatures above 200°C continuously and 220°C for a short time. It can operate under high temperature and high and low temperature alternation for a long time, expand and contract with temperature changes, and maintain good elasticity. Suitable for dry-wet alternation and high and low temperature changes.
4) High bonding strength
Under standard conditions, the bonding strength is greater than 1.3MPa, and under acid and water immersion conditions, the bonding strength is greater than 0.9MPa.
5) Low dosage
The coating thickness and gap width are controlled within 2.5-3.0mm.
6) Good elasticity
When the flue gas is forced to pass through the desulfurization tower and enter the chimney, it will not be damaged during the violent reheating process and the sudden temperature change caused by air preheating failure.
Send Inquiry
Description
product-800-800

1) Can be applied on steel plates and concrete lining materials;

2) High acid resistance and aging resistance;

3) High temperature resistance

It can withstand high temperatures above 200°C continuously and 220°C for a short time. It can operate under high temperature and high and low temperature alternation for a long time, expand and contract with temperature changes, and maintain good elasticity. Suitable for dry-wet alternation and high and low temperature changes.

4) High bonding strength

Under standard conditions, the bonding strength is greater than 1.3MPa, and under acid and water immersion conditions, the bonding strength is greater than 0.9MPa.

5) Low dosage

The coating thickness and gap width are controlled within 2.5-3.0mm.

6) Good elasticity

 

 

When the flue gas is forced to pass through the desulfurization tower and enter the chimney, it will not be damaged during the violent reheating process and the sudden temperature change caused by air preheating failure.

product-1694-800

 

Test items

Standard value 1.5

tensile strength(MPa)

1.5

Elongation at break(%)

80-200

(Bond) Shear Strength(MPa)

With steel plate

1.2

 

Vitrified tiles

0.6

 

With firebricks and red bricks

(Old chimney renovation)

0.9

Heat resistance (180℃×4h) (Tensile strength)

0.9

Heat aging resistance (200℃-20℃ water) (tensile strength)

0.6

Acid resistance

(5% H2SO4 immersion for 10 days)

0.9

 

(10% H2SO4 immersion for 10 days)

0.8

Water resistance

(Immerse for 10 days)

0.9

Heat resistance (180℃×4h)

(shear, bonding strength)

With steel plate

0.8

 

Vitrified tiles

0.5

 

With firebricks and red bricks

(Old chimney renovation)

0.6

Hot Tags: yxj-ⅱ acid-resistant and heat-resistant elastic sealant for power plants, China yxj-ⅱ acid-resistant and heat-resistant elastic sealant for power plants manufacturers, suppliers, factory, LS Acid Resistant Putty, Waterproof and Anti seepage Acid resistant Binder, Water Glass Perlite Products, chimney flue ash storage lining refractory material, Acid Resistant Bricks, Foam Ceramic Acid Resistant Brick